Springfield, Missouri

Pressure Washing

High pressure where it belongs, low pressure where it does not. Driveways, patios, decks, fences and siding across Springfield and 15 nearby towns.


Almost every horror story about pressure washing comes from one mistake: using the same pressure on everything. Concrete can take a great deal of force. Vinyl siding, shingles and stucco cannot. Matching the method to the surface is the entire job, and it is the reason we do two different things under one heading.

Pressure Washing and Soft Washing Are Not the Same

Pressure washing

High-pressure water on hard, durable surfaces. Concrete driveways, sidewalks, patios, pavers, steps and brick. It lifts embedded dirt, tyre marks, moss and algae out of a porous surface in a way that low pressure simply cannot.

Soft washing

Low pressure plus professional cleaning solutions, for anything that would be damaged by force. Vinyl and painted siding, stucco, roofs. The solution does the work; the water only rinses.

Soft washing is not the weaker option — on siding it is the better one. Blasting vinyl at high pressure forces water up behind the panels, where it sits in the wall cavity. On a roof it strips granules off the shingles and shortens their life. And because high pressure only knocks the surface layer off, algae and mould regrow quickly.

Soft washing kills the organic growth at the root instead of just removing the visible layer, so the result lasts substantially longer. It cleans deeper while being gentler, which sounds like a contradiction until you have seen both done side by side.

Book Online

Pick a day and time that suits you and we will confirm it. If you would rather just talk it through, call or text 417-766-8666 instead — either works.

Request a Free Quote Today

Tell us about the property and we will come back to you with a price. No obligation, and no pressure if the number is not right for you.

What We Clean, and How

  • Concrete driveways, sidewalks and patios — high pressure with a rotary surface cleaner
  • Pavers, brick walkways and entry steps — high pressure, adjusted for the joints
  • Wooden decks and privacy fences — moderate pressure, matched to the age and condition of the timber
  • Vinyl, painted siding, brick and stucco — soft washing only
  • Roofs — soft washing only, never high pressure
  • Commercial exteriors, walkways and dumpster pads

Why we use a rotary surface cleaner on concrete

A single spray wand cleans in an arc, and that arc leaves stripes. On a big slab you end up with a zebra-striped driveway that looks worse than before you started.

A rotary surface cleaner spins two jets under a shroud and cleans a consistent full-width path, so the finish is even from edge to edge. It is also faster, and it keeps the spray contained rather than throwing dirty water across your garage door and up the side of the house.

Worker running a rotary surface cleaner over a concrete driveway in Springfield MO
Rotary surface cleaner — even finish, no stripes
The same concrete driveway at a brick ranch home, grey and stained then clean tan after pressure washing
Same driveway, before and after
Rotary surface cleaner part-way across a concrete driveway showing the clean line
Mid-pass — the line shows the difference
Red brick front walkway dull and darkened, then bright red after pressure washing
Brick walkway, before and after
Worker pressure washing a wooden deck part-way across the boards
Decks get moderate pressure, matched to the timber
Privacy fence stained grey on one side and clean white on the other after washing
Privacy fence, halfway through

How the Job Runs

  1. Walk the property first We look at what each surface actually is before anything gets turned on. Vinyl and stucco get flagged for soft washing.
  2. Protect what needs protecting Plants, furniture, light fittings and outlets. Landscaping gets rinsed before and after so nothing sits on it.
  3. Apply and dwell On organic growth the solution needs time to work. Rushing this is why some jobs look clean for a month and then go green again.
  4. Clean, matched to the surface Rotary cleaner on the flat concrete, adjusted pressure on timber, low pressure and solution on siding.
  5. Rinse and check The whole area gets rinsed down, including the runoff paths, and we walk it with you or send photos if you are not there.

How Often

Most Springfield homes benefit from a wash every one to two years. Our humidity grows algae and mildew on north-facing walls and shaded concrete faster than a drier climate would.

Driveways and patios that get heavy use, or that sit under trees, often want yearly attention. Siding can usually go two years between soft washes unless it is shaded most of the day.

Pressure washing pricing starts at $150 as a baseline estimate. What it actually costs depends on square footage, how bad the buildup is, and access. We confirm the number before any work begins — no surprises once we are on site.

Common Questions

What is the difference between pressure washing and soft washing?

Pressure washing uses high-pressure water to clean durable surfaces like concrete, driveways, and sidewalks. Soft washing uses low pressure combined with professional cleaning solutions to safely remove algae, mold, and mildew from more delicate surfaces like siding, roofs, and stucco. Soft washing is the preferred method for house washing because it cleans deeper and helps prevent organic growth from returning quickly.

Is pressure washing safe for siding and brick?

Yes. We use a soft washing method that safely cleans vinyl siding, brick, stucco, and other exterior surfaces without causing damage.

What surfaces can be pressure washed?

Pressure washing can safely clean driveways, sidewalks, patios, decks, fences, brick, and concrete surfaces around your property.

How often should I pressure wash my home?

Most homes in Springfield, Missouri benefit from professional pressure washing or soft washing every 1 to 2 years to remove algae, mold, mildew, and dirt buildup.

How much does pressure washing cost in Springfield, Missouri?

The cost depends on the size of the property, the surfaces being cleaned, and the level of buildup. Most homeowners in Springfield schedule pressure washing for driveways, siding, patios, and walkways to remove dirt, algae, and mildew. Use our instant estimate tool for a ballpark, and we will confirm your exact price before any work begins.

Do you offer residential and commercial pressure washing?

Yes. We provide pressure washing services for both residential homes and commercial properties throughout Springfield, Missouri and surrounding areas.

Where We Pressure Wash

Springfield and generally anywhere within about 30 miles:

  • Springfield
  • Nixa
  • Ozark
  • Republic
  • Battlefield
  • Rogersville
  • Willard
  • Strafford
  • Fair Grove
  • Pleasant Hope
  • Ash Grove
  • Walnut Grove
  • Clever
  • Highlandville
  • Sparta
  • Fordland

Get a real number. Call or text 417-766-8666 and tell us what needs cleaning — driveway, siding, deck, or all of it. Photos help us quote faster and more accurately.

Get a free quote

Also worth a look: gutter cleaning, window cleaning, or our frequently asked questions.

Happy House Exteriors

Pressure washing, soft washing, window cleaning and gutter cleaning in Springfield, Missouri and within 30 miles.
417-766-8666  ·  Home  ·  FAQ  ·  Privacy Policy